您的位置: 标准下载 » 国内标准 » 行业标准 »

JJF 1191-2008 测听室声学特性校准规范

作者:标准资料网 时间:2024-05-14 15:57:28  浏览:9256   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:测听室声学特性校准规范
英文名称:Calibration Specification for Acoustic Performance of Audiometry Rooms
中标分类: 综合 >> 计量 >> 声学计量
ICS分类: 计量学和测量、物理现象 >> 声学和声学测量
发布部门:中华人民共和国国家质量监督检验检疫总局
发布日期:2008-03-24
实施日期:2008-06-24
首发日期:
作废日期:
主管部门:全国声学计量技术委员会
归口单位:全国声学计量技术委员会
起草单位:上海市计量测试技术研究院、中国计量科学研究院
起草人:顾建秀、邱建华等
出版社:中国质检出版社
出版日期:2008-06-24
页数:24页
书号:155026·J-2325
适用范围

本规范规定了对测听室声场学特性的测量方法。
该测听室适用于以气导耳机、扬声器或骨振器作为发声器件,使用纯音、调频音、窄带噪声或录制的语言材料作为测听信号的听阈检查。
本规范也适用于测量耳声发射和听觉诱发电位的测听室声学特性的测试。

前言

没有内容

目录

1 范围 (1) 2 引用文献 (1) 3 术语和计量单位 (1) 4 概述 (1) 5 计量特性 (2) 5.1 本底噪声声压级 (2) 5.2 声场特性 (5) 6 校准条件 (6) 6.1 环境条件 (6) 6.2 标准器及其他设备 (6) 7 校准项目和校准方法 (7) 7.1 校准项目 (7) 7.2 校准方法 (7) 8 校准结果表达 (10) 8.1 校准数据处理 (10) 8.2 校准证书 (10) 8.3 测量结果不确定度的评定 (10) 9 复校时间间隔 (10) 附录A 推荐的测听室校准证书的内容 (11) 附录B 测量结果不确定度的评定实例 (14)

引用标准

本规范引用下列文献
JJG176—2005 《声校准器》
JJG449—2001 《倍频程和1/3倍频程滤波器》
JJF1034—2005 《声学计量名词术语及定义》
JJF1059—1999 《测量不确定度评定与表示》
GB/T3102.7—1993 《声学的量和单位》
GB/T16296—1996 《声学测听方法第2部分:用纯音及窄带测试信号的声场测听》(eqvISO8253-2∶1992)
GB/T16403—1996 《声学测听方法纯音气导和骨导听阈基本测听法》(eqvISO8253-1∶1992)
GB/T20441.4—2006 《测量传声器第4部分:工作标准传声器规范》
使用本规范时,应注意使用上述引用文献的现行有效版本。

所属分类: 综合 计量 声学计量 计量学和测量 物理现象 声学和声学测量
下载地址: 点击此处下载
Product Code:SAE J474
Title:Electroplating and Related Finishes
Issuing Committee:Metals Technical Executive Steering Committee
Scope:Electroplating is a process whereby an object is coated with one or more relatively thin, tightly adherent layer of one or more metals. It is accomplished by placing the object to be coated on a plating rack or a fixture, or in a basket or in a rotating container in such a manner that a suitable current may flow through it, and then immersing it in a series of solutions and rinses in planned sequence. The advantage to be gained by electroplating may be considerable; broadly speaking, the process is used when it is desired to endow the basis material (selected for cost, material conservation, and physical property reasons) with surface properties it does not possess.It should be noted that although electroplating is the most widely used process for applying metals to a substrate, they may also be applied by spraying, vacuum deposition, cladding, hot dipping, chemical reduction, mechanical plating, etc. The purpose for applying an electroplate and the metals used for various applications follow.Product Code:SAE AMS4082
Title:Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of seamless, drawn tubing.